1.75mm PLA 3d printer filament for 3d printer
Product Description
PLA (polylactides) are synthetic polymers belonging to the polyesters. They are used to make plastic that is obtained from renewable sources (such as cornstarch). This makes PLA a biocompatible raw material. 3D printing Filament is often not a pure PLA, but a so-called PLA blend, whose basic structure is enriched with additives to obtain certain desired properties. All Elegoo PLA filaments are sealed with desiccant for storage and freshness.
Product Feature
1. Recommended Extrusion Temperatures: 205±15°C
2. Recommended Bed Temperature: Not needed, but if printer has 3.heated bed, 40±15 °C
4. Spool Dimensions (Approx.): 200mm Total Diameter x 50mm Inner 5.Hole Diameter x 65mm Height
6. 1 kg spool
7. True Diameter: 1.75mm
8. Dimensional Accuracy: ±0.03mm
9. Density: 1.25 g/cm³
10. Volume: 0.80 L
11. Length: 340 m
Product Information
| Product Parameter | PLA |
| Printing temperature | 180-220℃ |
| Diameter | 1.75mm/3.0mm |
| Color | more than 50 |
| Best printing temperature | 200℃ |
| Heating bed temperature | 50℃ |
| Heat Distortion Temperature | 80℃ |
| Net Weight | 1kg |
| Gross Weight | 1.35kg |
| Diameter tolerance | ±0.2mm |
Product Advantage
1. raw material: Made from 100% renewable and natural raw materials.
2. High impact resistance and good flexural strength. Great layer and bed adhesion.
3.Tangle-free filament winding: You no longer worry about the PLA being entangled when you go away. Let it print all night.
4. No warping (low shrinkage, 0.3%). +/- 0.02mm diameter tolerance.
5. Recommended Printing Temperature: 180 – 220C (ideal 195C). Heated Bed: Not Required (but can be used) , Recommended Printing Speed: 40 – 120 mm/s.
6. Compatible for most common 3D printers such as ROBO 3D, Cubify, Leapfrog, MakerBot, Reprap, Afinia, UP, Mendel, flashforge, Solidoodle 2, Printrbot LC, MakerGear M2, Felix, Reprap, Ultimaker and any other 3D printers
Product Tags:
|
|
Biocompatible 340m 1.75mm PLA 3d Printer Filament Images
|
